Recent Advancements in Mechanical Engineering
Select Proceedings of ICRAME 2021
(Sprache: Englisch)
This book presents select proceedings of the 2nd International Conference on Recent Advancements of Mechanical Engineering (ICRAME 2021), which was held during 7th to 9th February 2021 at National Institute of Technology Silchar. The book entails the recent...
Voraussichtlich lieferbar in 3 Tag(en)
versandkostenfrei
Buch (Kartoniert)
Fr. 177.00
inkl. MwSt.
- Kreditkarte, Paypal, Rechnungskauf
- 30 Tage Widerrufsrecht
Produktdetails
Produktinformationen zu „Recent Advancements in Mechanical Engineering “
Klappentext zu „Recent Advancements in Mechanical Engineering “
This book presents select proceedings of the 2nd International Conference on Recent Advancements of Mechanical Engineering (ICRAME 2021), which was held during 7th to 9th February 2021 at National Institute of Technology Silchar. The book entails the recent developments in a range of areas related to mechanical engineering. It examines the state-of-the-art researches in the areas of thermal engineering, engineering design, manufacturing/ production engineering and surface engineering. Various topics covered include advanced energy sources, bio-thermal applications, techniques in fluid flow, computing in applied mechanics and product design, dynamics and control of structures/ systems, fracture and failure mechanics, solid mechanics, casting, welding, brazing, soldering, JIT, MRP, supply chain management and logistics. The book will be useful for researchers and professionals working in the areas of mechanical engineering.Inhaltsverzeichnis zu „Recent Advancements in Mechanical Engineering “
Influence of Non-uniform Heating Profiles on Free Convection Entropy Generation Inside an Enclosure Filled with Nanofluid.- Mechanical Properties, Microstructural and Surface Topography Evaluation of ALSI10MG Alloy Produced by DMLS Process.- Experimental Investigation of the Performance of a Low-Cost Flexible All Plastic Solar Air Heater.- Microbial Fuel Cell- A Review.- Optimization of MRR and KW of SS 304 in Wire EDM By RSM Technique.- Numerical Study on Effects of Geometrical and Operating Parameters of Bolt on Performance of Bolted Joint.- Effect of Electrode Length and AC Frequency on Mixing in a Diamond-Shaped Split and Recombine Electroosmotic Micromixer.- Parametric Optimization of Tribological Process Parameters and their Comparative Effect on Wear Responses of Ticrn Coated Cold Work Tool Steel.- Effect of Surface Modification on the Nanomechanical and Wear Properties of AISI D3 Cold Work Tool Steel.- Performance Analysis of Split Circular and Drop-form Fin Geometry for Enhanced Heat Transfer Rate.
Autoren-Porträt
Dr. T. S. Sudarshan is the President and CEO of Materials Modification, Inc. He has a PhD from Virginia Tech and has been responsible for driving the company's technological leadership in the development of next generation materials, processes and techniques for the past 34 years. He has been a passionate entrepreneur and provided employment to over 400 individuals, provided the first jobs for over 200 students, served on over 10 thesis committees for M.S. and Ph.Ds. Dr Sudarshan has served on the National Materials Advisory Board, Ohio Third Frontier Committees, Ohio Federal Research Network, ASM International Board, Committees for the Army, NSF, NIH and DoE and Selection Committee for the R&D100 awards. He has over 180 papers, is editor of two journals - Materials and Manufacturing Processes since 1988 and Surface Engineering since 1996, coeditor of 34 books, holder of 36 patents, winner of two R and D 100 awards, Fellow of ASM International, Fellow of IFHTSE, Fellow of IMMM, UK, and Distinguished Alumni of IITM. He has been responsible for heading the development of 18 products and has worked in difficult-to-solve problems in the area of nanotechnology and surface engineering. He has also been on the Advisory Board of ATI, South Carolina and several other companies as a consultant.Prof. K. M. Pandey did Ph.D in 1994 from Department of Mechanical Engineering, IIT Kanpur, India. Currently he is working as Professor (HAG) of Mechanical Engineering at National Institute of Technology Silchar, Assam, India, since September 2018 and as Professor since May 2006. He obtained B. Tech in Mechanical Engineering from BHUIT Varanasi in 1980 now known as IITBHU and M. Tech in Heat Power engineering in 1987 from the same institute. He has authored more than 159 research papers in SCI/SCIE/ Scopus indexed journals and conferences. His h-index is 19 in Scopus and SCI and 24 in google scholar. He has also authored 6 booksand 9 book chapters. Currently he is
... mehr
working in the area of thermo fluids and manufacturing sciences. He has also served as seconded faculty consultant at CPSC, Manila, Philippines in 2002. He has served NIT Silchar as Dean Faculty welfare and Dean Research in the year 2011 and 2012. He has served as Head of Department for two terms of 3 years at NIT Silchar. He is taken as member of BOG, NIT Silchar twice. He is a fellow of Institution of Engineers India and member of ASME. He is life member of Welding Society of India and life member of Fluid Mechanics and Fluid Power Society of India. Prof. K M Pandey had been keynote speaker and co-editor in 2nd Annual International Conference on Advanced Material Engineering [AME2016], April 15-17, 2016, Wuhan, Hubei, China; keynote speaker in International Seminar in Advances in Materials Science and Engineering, Singapore, 22-24 June 2018 and keynote speaker and General Chair 5th International Conference on Green Materials and Environmental Engineering (GMEE2019), Guangzhou, China. He is taken as member of editorial boards and reviewer in many reputed international journals. In 2020 he has been keynote speaker in 3 international conferences held in Beijing and Shanghai and he has been editor in ICMEM 2020 held in Shanghai and the proceedings is published as book by Springer in December 2020.
Dr. Rahul Dev Misra has got his B.E. (Mechanical Engineering) from Jorhat Engg. College under Dibrugarh University in 1991. He did his M.Tech in the specialization of Energy Studies from IIT Delhi in 1996. He has got the Ph.D. degree from IIT Roorkee in 2004. Dr. Misra has joined the Department of Mechanical Engineering of National Institute of Technology (formerly, Regional Engineering College) Silchar in 1992 as Lecturer. Presently he is serving as Professor (HAG) in the same department. He has served NIT Silchar at various administrative capacities like Dean (SW), Dean (FW), Head of Mechan
Dr. Rahul Dev Misra has got his B.E. (Mechanical Engineering) from Jorhat Engg. College under Dibrugarh University in 1991. He did his M.Tech in the specialization of Energy Studies from IIT Delhi in 1996. He has got the Ph.D. degree from IIT Roorkee in 2004. Dr. Misra has joined the Department of Mechanical Engineering of National Institute of Technology (formerly, Regional Engineering College) Silchar in 1992 as Lecturer. Presently he is serving as Professor (HAG) in the same department. He has served NIT Silchar at various administrative capacities like Dean (SW), Dean (FW), Head of Mechan
... weniger
Bibliographische Angaben
- 2022, 1st ed. 2023, XV, 647 Seiten, 319 farbige Abbildungen, Masse: 15,5 x 23,5 cm, Kartoniert (TB), Englisch
- Herausgegeben: T. S. Sudarshan, K. M. Pandey, R. D. Misra, P. K. Patowari, Swapan Bhaumik
- Verlag: Springer, Berlin
- ISBN-10: 9811932654
- ISBN-13: 9789811932656
Sprache:
Englisch
Kommentar zu "Recent Advancements in Mechanical Engineering"
0 Gebrauchte Artikel zu „Recent Advancements in Mechanical Engineering“
| Zustand | Preis | Porto | Zahlung | Verkäufer | Rating |
|---|
Schreiben Sie einen Kommentar zu "Recent Advancements in Mechanical Engineering".
Kommentar verfassen