Characterization of Minerals, Metals, and Materials 2017

MICROSTRUCTUAL INVESTIGATION AND IMPACT TESTING OF ADDITIVE MANUFACTURED TI-6AL-4V.- Part 6: Powders and Foams.- SYNTHESIS OF TiN NANO-COMPOSITE POWDER BY HIGH-ENERGY BALL MILLING OF TiH2 UNDER NITROGEN ATMOSPHERE.- Application of AFM in Morphology Determination of Powder Material.- Effects of Thermal Processing on Closed-Cell Aluminium Foams.- Experimental Investigation of Mechanical Behaviour of Closed-Cell Aluminium Foams under Drop Weight Impact.- Deformation Mechanisms of Closed Cell-Aluminium Foams during Drop Weight Impact.- Part 7: Minerals.- INDUSTRIAL USE OF BRAZILIAN BENTONITE MODIFIED  BY MILD ACID ATTACK.- Mullitization Characteristics and Sinterability of Kyanite in Ceramic Preparation.- Ore Dressing and Technological characterization of Palygorskite from Piauí/Brazil for applications as adsorbent of heavy metals.- TECHNOLOGICAL CHARACTERIZATION OF WASTE FROM GOLD MINING DAM.- Synthesis and Characterization of Sodalite and Cancrinita from Kaolin.- Part 8: Ferrous Metals.- Effects of Alumina and Magnesia on Microstructure and Mineralogy of Iron Ore Sinter.- Isothermal Reduction Kinetics of CaO·2Fe2O3 by Thermogravimetric Analysis.- Phase Transformation of MnO2 and Fe2O3 Briquettes Roasted Under CO-CO2 Atmospheres.- Contact Angle of Iron Ore Particles with Water: Measurements and Influencing Factors.- Important Factors to Consider in FIB Milling of Crystalline Materials.- Part 9: Material Processing and Corrosion.- Corrosion Behavior of Super-Ferritic Stainless Steels in NaCl media.- Effect of bromide ions on the pitting corrosion of hafnium in anhydrous t-butanol and acetonitrile.- Compression Behavior of Semi-Closed Die Forged AZ80 Extrusion.- Nondestructive Characterization of Microstructures of Heat-Treated Steels by Magnetic Barkhausen Noise Technique.-  Part 10: Method Development.- Development of A New Recycling Process of PGM from Metal-supported Catalyst Using Complex Oxide.- Part 11: Composites.- High thermal conducting composites using percolation theory.- SORPTION CHARACTERISTICS OF LOW DENSITY POLYETHYLENE/KOLA NUT COMPOSITE.- Residual Stress Analysis within Steel Encapsulated Metal Matrix Composites Via Neutron Diffraction.- Tensile Behavior of Epoxy Matrix Composites Reinforced With Pure Ramie Fabric.- Hemp Fiber Density Using the Pycnometer Technique.- Preparation and Characterization of Clay Exfoliation and Vegetal fibre on Properties of Recycled Low Density Polyethylene (rLDPE).- Part 12: Ferrous Metals.- Estimation of Dislocation Density in Metals from Microhardness Test.- Part 13: Welding and Solidification.- Interfacial strength characterization in a high-modulus low-density steel-based Fe-TiB2 composite.- Part 14: Materials Extractions.- Leaching of Copper-Cobalt Tailings from the Democratic Republic of Congo.- OPTIMUM OPERATING CONDITIONS FOR EXTRACTION OF LIGNIN PRECURSORS FROM PALM FRUIT BUNCH.- SELECTION ON THE PROCESS FOR ENRICHING GOLD FROM REFRACTORY GOLD ORES BY SMELTING.- SELECTION ON THE PROCESS FOR REMOVING AND RECOVERING ANTIMONY FROM ANTIMONIAL REFRACTORY GOLD ORES.- Upgrading of Copper and Cobalt from the Democratic Republic of Congo Tailings.- CHARACTERIZATION OF SPENT PRINTED CIRCUIT BOARDS FROM COMPUTERS.- Study of the Effect of the Initial Nucleation Mechanism of Lead Anode Oxidation Film on Internal Stress in Chromic Acid Electrolyte.- Part 15: Poster Session.- Addition of Cellulose Nanofibers in Reactive Powder Concrete.- ADVANCED ION COLUMN SOLUTION FOR LOW ION DAMAGE CHARACTERIZATION AND ULTRA-FINE PROCESS.- Application of Membrane Separation Technology in Wastewater Treatment of Iron and Steel Enterprise.- Brillouin Scattering Study on Elastic Properties of Bulk hcp ZnO Single Crystal.- Characteristics of stamp charging coke and top charging coke.- Characterization and leaching proposal of Ag ( I) from a Zn concentrate.- Characterization and Mechanical Properties of Additively Manufactured Stainless Steel 316L.- CHARACTERIZATION OF MERCURY JAROSITE.- Characterization of steel production dust and their use in structural ceramics.- CHARPY TOUGHNESS BEHAVIOR OF JUTE FABRIC REINFORCED POLYESTER MATRIX COMPOSITES.- Chemical and Mineralogical Characterization of a Mixed Sulphide Ore at Zimapan, Hidalgo.- Contribution to the ss relaxation study of the HDPE, LDPE and LLDPE.- Determination of Ten Impurity Elements in Tin Concentrate and Smelting Products by ICP-AES.- Effects of wet grinding on the structure and granularity of biological origin aragonite and its polymorphic transformation into calcite.- EVALUATION OF BALLISTIC ARMOR BEHAVIOR WITH EPOXY COMPOSITE REINFORCED WITH MALVA FIBERS.- EVALUATION OF THE POZZOLANIC ACTIVITY OF RESIDUE FROM THE PAPER INDUSTRY.- EVALUATION OF THE PROPERTIES OF THE ADHESIVE MORTAR IN THE FRESH STATE WITH ADDITION OF GLASS WASTE.- Experimental Evaluation of the Influence of Mortar's Mechanical Properties on The Behavior of Clay Masonry.- Influence of Operation Conditions on Normal Stress and Flow Pattern of Burden Materials in Blast Furnace Based on Discrete Element Method.- Polymer Blend based on recycled polyethylene and ethylene vinyl acetate copolymers reinforced with natural fibers from agricultural wastes.- Preliminary study of the effect of stirring rate, temperature and oxygen pressure on the leach rate of copper powder, generated by grinding of printed circuit boards of computer.- Preparation and Characterization of Polyethylene Nanocomposites with Clay and Silver Nanoparticles.- Production of concrete interlocking blocks with partial replacement of sand in bulk by waste glass machined.- Reactive Powder Concrete Production with the Addition of Granite Processing Waste.- Research on the reason of the different type of chloride forming in the process of blast furnace ironmaking.- Stress and Deformation Analysis of Hot Blast Stove Piping System.- Stress and Deformation Analysis of Top Combustion Hot Blast Stove Shell.- STUDY OF CALCINED MIXTURES FROM INDUSTRIAL RESIDUES FOR PRODUCTION OF AGGLOMERATES.-STUDY OF SYNERGISTIC EFFECT OF LIGHT STABILIZER ADDITIVE, CONVENTIONAL AND NANOPARTICLES, APPLIED TO POLYETHYLENE FILMS SUBMITTED TO ULTRAVIOLET RADIATION.- Study of the effect of surface liquid flow during column flotation of mining tailing of the Dos Carlos dam.- STUDY ON BENDING TEST ON CONCRETE STRUCTURAL USE CRUMB RUBBER AS SUBSTITUTE IN FINE AGGREGATE.- Synthesis and structural characterization of BaTiO3 doped with Gd3+.- Texture analysis and anisotropic properties of a rolled CuZn36 brass alloy.- The influence of titanium content on the sinter ore phase structure and the crack.- The use of Network Simplex method for planning the incorporation of recycled paper mill sludge in manufacturing of ceramic bodies.- USE OF ALKALINE SOLID WASTES FROM KRAFT PULP AND PAPER MILLS, DREGS AND GRITS IN CEMENT PRODUCTION.- Wood-to-concrete joints using steel connectors: experimental evaluation.