Additive and Subtractive Manufacturing of Composites
(Sprache: Englisch)
This book describes crucial aspects related to the additive and subtractive manufacturing of different composites.
The first half of this book mainly deals with the various types of composite fabrication methods along with the...
Voraussichtlich lieferbar in 3 Tag(en)
versandkostenfrei
Buch (Kartoniert)
Fr. 153.50
inkl. MwSt.
- Kreditkarte, Paypal, Rechnungskauf
- 30 Tage Widerrufsrecht
Produktdetails
Produktinformationen zu „Additive and Subtractive Manufacturing of Composites “
Klappentext zu „Additive and Subtractive Manufacturing of Composites “
This book describes crucial aspects related to the additive and subtractive manufacturing of different composites.
The first half of this book mainly deals with the various types of composite fabrication methods along with the introduction, features and mechanisms and also the processing of composite materials via additive manufacturing route. Also, the thermal, mechanical, physical and chemical properties relevant to the processing of composite materials are included in the chapters.
The second half of this book primarily demonstrates an extensive section on the different types of additive manufacturing processes like selective laser sintering, selective laser melting, stereolithography, fused deposition modeling and material jetting used to fabricate the metals and polymers. Also, the chapters address the complete description of fabrication processes for metal matrix composites and polymer matrix composites. Moreover, the different methods adoptedsuch as short peening, micro-machining, heat-treatment and solution treatment to improve the surface improvement are well discussed.
This book gives many helps to researchers and students in the fields of the additive and subtractive manufacturing of different composites.
Inhaltsverzeichnis zu „Additive and Subtractive Manufacturing of Composites “
1. Composite materials, applications and future challenges of friction welding.- 2. Influence of Reinforcement Contents and Turning Parameters on the Machining Behaviour of Al/SiC/Cr Hybrid Aluminium Matrix Composites.- 3. Ultrasound added additive manufacturing for metals and composites: Process and control.- 4. Processing and manufacturing Ti6Al4V-based structures and composites using EBM and SLM.- 5. Laser Drilling of Superalloys and Composites.
Autoren-Porträt
Dr. Sanjay Mavinkere Rangappa, is currently working as a Research Scientist and also Advisor within the office of the President for University Promotion and Development towards International goals at King Mongkut's University of Technology North Bangkok, Bangkok, Thailand. He has received the B. E (Mechanical Engineering) in the year 2010, M. Tech (Computational Analysis in Mechanical Sciences) in the year 2013, Ph.D (Faculty of Mechanical Engineering Science) from Visvesvaraya Technological University, Belagavi, India in the year 2017 and Post Doctorate from King Mongkut's University of Technology North Bangkok, Thailand, in the year 2019. He is a Life Member of Indian Society for Technical Education (ISTE) and an Associate Member of Institute of Engineers (India). He acts as a Board Member of various international journals in the fields of materials science, and composites. He is a reviewer for more than 85 international Journals (for Nature, Elsevier, Springer, Sage, Taylor & Francis, Wiley, American Society for Testing and Materials, American Society of Agricultural and Biological Engineers, IOP, Hindawi, NC State University USA, ASM International, Emerald Group, Bentham Science Publishers, Universiti Putra, Malaysia), also reviewer for book proposals, and international conferences. He has published more than 130 articles in high-quality international peer-reviewed journals, 5 editorial corners, 35 book chapters, one book, 15 books as an Editor, and also presented research papers at national/international conferences. In addition, he has filed 1 Thailand Patent and 3 Indian patents. His current research areas include Natural fiber composites, Polymer Composites, and Advanced Material Technology. He is a recipient of the DAAD Academic exchange-PPP Programme (Project- related Personnel Exchange) between Thailand and Germany to Institute of Composite Materials, University of Kaiserslautern, Germany. He has received a Top Peer Reviewer 2019 award,
... mehr
Global Peer Review Awards, Powered by Publons, Web of Science Group. The KMUTNB selected him for the 'Outstanding Young Researcher Award 2020'. He has recognized by Stanford University's list of the world's Top 2% of the Most-Cited Scientists in Single Year Citation Impact 2019.
Dr. Munish Kumar Gupta is working as a Post Doc Research Fellow in the School of Mechanical Engineering, Shandong University, China. He obtained Ph.D. in mechanical engineering from National Institute of Technology, India in 2018. He is a reviewer for more than 20 international Journals (for Elsevier, Springer, Sage, Taylor & Francis, Wiley). In addition, he has published more than 90 articles in high quality international peer reviewed journals, 6 book Chapters, one book (Editor) and also presented research papers at national/international conferences. His area of interest is sustainable manufacturing, machining, welding, rapid prototyping etc.
Prof. Dr.-Ing. habil. Suchart Siengchin is President of King Mongkut's University of Technology North Bangkok. He has received his Dipl.-Ing. in Mechanical Engineering from University of Applied Sciences Giessen/Friedberg, Hessen, Germany in 1999, M.Sc. in Polymer Technology from University of Applied Sciences Aalen, Baden-Wuerttemberg, Germany in 2002, M.Sc. in Material Science at the Erlangen-Nürnberg University, Bayern, Germany in 2004, Doctor of Philosophy in Engineering (Dr.-Ing.) from Institute for Composite Materials, University of Kaiserslautern, Rheinland-Pfalz, Germany in 2008 and Postdoctoral Research from Kaiserslautern University and School of Materials Engineering, Purdue University, USA. In 2016 he received the habilitation at the Chemnitz University in Sachen, Germany. He worked as a Lecturer for Production and Material Engineering Department at The Sirindhorn International Thai-German Graduate School of Engineering (TGGS), KMUTNB. He has been full Professor at KMUTNB and became the President of KMUTNB. He won the Ou
Dr. Munish Kumar Gupta is working as a Post Doc Research Fellow in the School of Mechanical Engineering, Shandong University, China. He obtained Ph.D. in mechanical engineering from National Institute of Technology, India in 2018. He is a reviewer for more than 20 international Journals (for Elsevier, Springer, Sage, Taylor & Francis, Wiley). In addition, he has published more than 90 articles in high quality international peer reviewed journals, 6 book Chapters, one book (Editor) and also presented research papers at national/international conferences. His area of interest is sustainable manufacturing, machining, welding, rapid prototyping etc.
Prof. Dr.-Ing. habil. Suchart Siengchin is President of King Mongkut's University of Technology North Bangkok. He has received his Dipl.-Ing. in Mechanical Engineering from University of Applied Sciences Giessen/Friedberg, Hessen, Germany in 1999, M.Sc. in Polymer Technology from University of Applied Sciences Aalen, Baden-Wuerttemberg, Germany in 2002, M.Sc. in Material Science at the Erlangen-Nürnberg University, Bayern, Germany in 2004, Doctor of Philosophy in Engineering (Dr.-Ing.) from Institute for Composite Materials, University of Kaiserslautern, Rheinland-Pfalz, Germany in 2008 and Postdoctoral Research from Kaiserslautern University and School of Materials Engineering, Purdue University, USA. In 2016 he received the habilitation at the Chemnitz University in Sachen, Germany. He worked as a Lecturer for Production and Material Engineering Department at The Sirindhorn International Thai-German Graduate School of Engineering (TGGS), KMUTNB. He has been full Professor at KMUTNB and became the President of KMUTNB. He won the Ou
... weniger
Bibliographische Angaben
- 2022, 1st ed. 2021, XV, 247 Seiten, 65 farbige Abbildungen, Masse: 15,5 x 23,5 cm, Kartoniert (TB), Englisch
- Herausgegeben: Sanjay Mavinkere Rangappa, Munish Kumar Gupta, Suchart Siengchin, Qinghua Song
- Verlag: Springer, Berlin
- ISBN-10: 9811631867
- ISBN-13: 9789811631863
Sprache:
Englisch
Kommentar zu "Additive and Subtractive Manufacturing of Composites"
0 Gebrauchte Artikel zu „Additive and Subtractive Manufacturing of Composites“
| Zustand | Preis | Porto | Zahlung | Verkäufer | Rating |
|---|
Schreiben Sie einen Kommentar zu "Additive and Subtractive Manufacturing of Composites".
Kommentar verfassen